Musica edin torni

A pressure switch is a form of switch that closes an electrical contact when a certain hydraulic pressure switch pdf fluid pressure has been...

A pressure switch is a form of switch that closes an electrical contact when a certain hydraulic pressure switch pdf fluid pressure has been reached on its input. The switch may be designed to make contact either on pressure rise or on pressure fall.


Pressure switches are widely used in industry to automatically supervise and control systems that use pressurized fluids. Such sensors are also used in security alarm applications such as pressure sensitive floors. A pressure switch for sensing fluid pressure contains a capsule, bellows, Bourdon tube, diaphragm or piston element that deforms or displaces proportionally to the applied pressure.

The resulting motion is applied, either directly or through amplifying levers, to a set of switch contacts. Since pressure may be changing slowly and contacts should operate quickly, some kind of over-center mechanism such as a miniature snap-action switch is used to ensure quick operation of the contacts. The pressure switch may be adjustable, by moving the contacts or adjusting tension in a counterbalance spring. Industrial pressure switches may have a calibrated scale and pointer to show the set point of the switch.

A pressure switch will have a differential range around its setpoint in which small changes of pressure do not change the state of the contacts. Some types allow adjustment of the differential. The pressure-sensing element of a pressure switch may be arranged to respond to the difference of two pressures.

Such switches are useful when the difference is significant, for example, to detect a clogged filter in a water supply system. The switches must be designed to respond only to the difference and not to false-operate for changes in the common mode pressure.

The contacts of the pressure switch may be rated a few tenths of an ampere to around 15 amperes, with smaller ratings found on more sensitive switches. Often a pressure switch will operate a relay or other control device, but some types can directly control small electric motors or other loads. Since the internal parts of the switch are exposed to the process fluid, they must be chosen to balance strength and life expectancy against compatibility with process fluids.

For example, rubber diaphragms are commonly used in contact with water, but would quickly degrade if used in a system containing mineral oil. Switches designed for use in hazardous areas with flammable gas have enclosure to prevent an arc at the contacts from igniting the surrounding gas. Switch enclosures may also be required to be weatherproof, corrosion resistant, or submersible.

admin